Jet

Home > By Manufacturer > Jet > Page 5

Jet

L100 Series Manual Chain Hoists (Wt. Cap. : 1/2 tons, Lifting Height/Take-Up : 10.00 ft, No. of Falls : 1)

L100 Series Manual Chain Hoists (Wt. Cap. : 1/2 tons, Lifting Height/Take-Up : 20.00 ft, No. of Falls : 1)

Lathe Accessories (Used With : 321200 Lathe, 350200 Mill, Wt. : 47 1/2 lb)

L100 Series Manual Chain Hoists
(Wt. Cap. : 1/2 tons, ...

L100 Series Manual Chain Hoists
(Wt. Cap. : 1/2 tons, ...

Lathe Accessories
(Used With : 321200 Lathe, 350200 ...


Lathes (Swing Over Bed : 8 3/4 in, Swing Over Cross Slide : 5 1/4 in, Distance Between Centers : 20 in)

Lever Type Load Binders (Chain Size : 5/16 in, 3/8 in, Lifting Height/Take-Up : 4.00 in, Working Load Limit : 5400 lb)

Lever Type Load Binders (Chain Size : 1/2 in, 3/8 in, Lifting Height/Take-Up : 4.00 in, Working Load Limit : 9200 lb)

Lathes
(Swing Over Bed : 8 3/4 in, Swing Over Cross ...

Lever Type Load Binders
(Chain Size : 5/16 in, 3/8 ...

Lever Type Load Binders
(Chain Size : 1/2 in, 3/8 in, ...


Manual Bench Cold Saws (Blade Diam : 225 mm, Arbor Diam : 2 mm, Blade Thickness : 32 mm)

Manual Hydraulic Pipe Benders (Pipe Cap. : 1/2 in, 3/4 in, 1 in, 1 1/4 in, 1 1/2 in, 2 in, Pipe Wall Thickness : 0.20 in [Max], Load Cap. : 9 tons [Max])

Manual Hydraulic Pipe Benders (Pipe Cap. : 1/2 in, 3/4 in, 1 in, 1 1/4 in, 1 1/2 in, 2 in, 2 1/2 in, 3 in, Pipe Wall Thickness : 0.24 in [Max], Load Cap. : 20 tons [Max])

Manual Bench Cold Saws
(Blade Diam : 225 mm, Arbor ...

Manual Hydraulic Pipe Benders
(Pipe Cap. : 1/2 in, ...

Manual Hydraulic Pipe Benders
(Pipe Cap. : 1/2 in, ...


Milling/Drilling Machines (Face Mill Cap. : 3 in, End Mill Cap. : 3/4 in, Spindle Thread : R-8)

Mini Belt Sanders (Belt Width : 3/4 in, Belt Length : 20 1/2 in, Power Cap. : 0.450 hp [Max])

Mitering Band Saws (Blade Width : 1 in, Blade Length : 130 in, Blade Thickness : 0.0350 in)

Milling/Drilling Machines
(Face Mill Cap. : 3 in, End ...

Mini Belt Sanders
(Belt Width : 3/4 in, Belt Length : ...

Mitering Band Saws
(Blade Width : 1 in, Blade Length ...


Needle Scaler/Flux Chippers (Stroke Length : 7/8 in, Cycle Rate : 4000 blows/min, Pressure : 90.00 psi)

Needle Scaler/Flux Chippers (Stroke Length : 1 1/8 in, Cycle Rate : 4600 blows/min, Pressure : 90.00 psi)

Needle Scaler/Flux Chippers (Stroke Length : 1 1/8 in, Cycle Rate : 4600 blows/min, Pressure : 90.00 psi)

Needle Scaler/Flux Chippers
(Stroke Length : 7/8 in, ...

Needle Scaler/Flux Chippers
(Stroke Length : 1 1/8 ...

Needle Scaler/Flux Chippers
(Stroke Length : 1 1/8 ...


Open Stands (Depth : 15 in, Height : 26 in, Material : Metal)

Pedestal Stands (Material : Cast Iron, Type : Pedestal Stand, Used With : Bench Grinders)

Pipe Clamps w/Slip Clutch (Pipe Size : 1/2 in, Body Material : Cast Iron, Locking Type : Thread Locking)

Open Stands
(Depth : 15 in, Height : 26 in, Material ...

Pedestal Stands
(Material : Cast Iron, Type : ...

Pipe Clamps w/Slip Clutch
(Pipe Size : 1/2 in, Body ...


Pipe Clamps w/Slip Clutch (Pipe Size : 3/4 in, Body Material : Cast Iron, Locking Type : Thread Locking)

Pneumatic Die Grinders (Collet Size : 1/4 in, Power Cap. : 1/4 hp, Free Speed : 25000 rpm [Max])

Pneumatic Die Grinders (Collet Size : 1/4 in, Power Cap. : 1/4 hp, Free Speed : 22000 rpm [Max])

Pipe Clamps w/Slip Clutch
(Pipe Size : 3/4 in, Body ...

Pneumatic Die Grinders
(Collet Size : 1/4 in, Power ...

Pneumatic Die Grinders
(Collet Size : 1/4 in, Power ...


Pneumatic Drills (Chuck Size : 3/8 in, Chuck Type : Keyless, Power Cap. : 1/2 hp)

Pneumatic Drills (Chuck Size : 1/2 in, Chuck Type : Keyless, Power Cap. : 1/2 hp)

Pneumatic Riveting Hammers (Chuck Type : Quick Release, Stroke Length : 2 5/8 in, Wt. : 4.19 lb)

Pneumatic Drills
(Chuck Size : 3/8 in, Chuck Type : ...

Pneumatic Drills
(Chuck Size : 1/2 in, Chuck Type : ...

Pneumatic Riveting Hammers
(Chuck Type : Quick ...


PT Series Plain Trolleys (Load Cap. : 1/2 tons [Max], Beam Height : 4 in [Min], 19 in [Max], Beam Width : 2 1/2 in [Min], 8 in [Max])

PT Series Plain Trolleys (Load Cap. : 1 tons [Max], Beam Height : 4 in [Min], 19 in [Max], Beam Width : 3 in [Min], 8 in [Max])

PT Series Plain Trolleys (Load Cap. : 1 1/2 tons [Max], Beam Height : 4 in [Min], 19 in [Max], Beam Width : 3 1/4 in [Min], 8 in [Max])

PT Series Plain Trolleys
(Load Cap. : 1/2 tons [Max], ...

PT Series Plain Trolleys
(Load Cap. : 1 tons [Max], ...

PT Series Plain Trolleys
(Load Cap. : 1 1/2 tons ...


PT Series Plain Trolleys (Load Cap. : 2 tons [Max], Beam Height : 4 in [Min], 19 in [Max], Beam Width : 3 1/4 in [Min], 8 in [Max])

PT Series Plain Trolleys (Load Cap. : 3 tons [Max], Beam Height : 5 in [Min], 19 in [Max], Beam Width : 4 in [Min], 8 in [Max])

Quick Change Spring Retainers (Wt. : 0.14 lb)

PT Series Plain Trolleys
(Load Cap. : 2 tons [Max], ...

PT Series Plain Trolleys
(Load Cap. : 3 tons [Max], ...

Quick Change Spring Retainers
(Wt. : 0.14 lb)



page: «back · 1 · 2 · 3 · 4 · 5 · 6> · next»


Home > By Manufacturer > Jet > Page 5

All brands and product names are trademarked or registered trademarks of their respective companies.
Prices, specifications, and availability are subject to change without notification. E.&O.E.
Image & Description provided by and used with permission from The Betty Mills Company.
Page revised: Friday, December 30, 2011. Powered by DySE::BettyMills

 

Find:
Search
All categories
Site Map

Main Categories:
By Manufacturer
Facility
Food
Furniture
Janitorial
Office
Outdoor



In association with
BettyMills.com